Rele 120 - 150 amperios Victron energy bateria Cyrix-ct - 480735 - Eurotete
Rele 120 - 150 amperios Victron energy bateria Cyrix-ct - 480735 - Eurotete Rele 120 - 150 amperios Victron energy bateria Cyrix-ct - 480735 - Eurotete

Victron energy battery Cyrix-ct

In stock
Reference:
480735
Victron energy

The 12V / 24V 120A Cyrix CT Victron Energy battery combiner is an intelligent split charging solution packed with features for charging your battery your alternator service and ensuring that never accidentally flatten your starter battery. 

€64.55

Secure and reliable payment with

 

More commonly known as a sensitive voltage (or detection) split charge relay, this unit will automatically connect your starter and leisure batteries when a charging voltage is detected and will be disconnected automatically when it detects the distance voltage drop when the engine is off. This isolates batteries when they are not charging for what your starting battery not can be drained by its internal circuits.

This relay of software trends features to overcome the short-term levels of voltage fluctuations and prevent accidental disconnection voltage (for example, when connecting for the first time to a battery of leisure with very low load and / or a very high capacity, resultant voltage through the starter battery can be significant and may cause a false disconnect on some other relays of voltage detection-) is it sometimes referred to as 'chat' as the relay opens and closes repeatedly quickly).

Another useful function is the start of emergency assistance. If the starter battery has become in flattened and want to use the battery to start the vehicle, you can manually close the relay using a momentary switch connected to the terminal of 85 (relay remains closed for 30 seconds).

NOTE:  These relays are not suitable for vehicles with alternators "intelligent" or "smart". As guide this applies to vehicles that have engines that comply with the standards Euro 5 emissions and onwards, often also incorporate regenerative braking (in case of doubt consult vehicle manufacturer to confirm). If your vehicle has an intelligent alternator, then you will have to use a battery instead of a VSR battery charger.

Features

  • 12V or 24V operation (automatic detection)
  • trends of tension software
  • dual detection (which also allows the leisure to starter battery charge, for example, when using a battery charger)
  • Overcurrent protection
  • overheat protection (back to commit automatically once cooled)
  • The start of emergency assistance
  • Practically zero voltage and low standby current consumption
  • There is no connection of alternator requires
  • Sealed for use in hostile environments (marine use, bays of engines of vehicles, etc.)

Specification

  • Rated voltage:  12 v or 24 V DC
  • Current rating (continuous):  120A
  • Current rating (peak): 180a for 5s
  • Connect the voltage:  13.3-13.8V / 26-27.6V (software dependent)
  • Switch off voltage:  11.0-12.8V / 22 - 25.7V (software dependent)
  • Standby current consumption: 4 mA Max.
  • Operating current consumption: 220mA (12V) / 120mA (24V)
  • Main terminal size  2 x asparagus M6x13mm
  • Emergency boot help size of the terminal: 2 x 6.3 mm blades male
  • Operating temperature: -40 to + 40 ° C
  • Degree of ingress protection: IP54
  • Fixing a hole of diameter: 6 mm
  • Overall dimensions: 46 (w) 46 x (D) x 80 (H) mm

 

0
Rating:
0% of 100
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account